| EasyWeed by Siser Vinyl Heat Transfer Media EasyWeed Vinyl Heat Transfer material is a thermoweldable PVC-free material for CAD application onto non-siliconized textiles. Much thinner than standard materials. EW offers excellent wash ability as well as durability, and is extremely easy to cut, weed and apply. Because of the thinness, excellent performance can be achieved with single or multi-layered applications. EW is a unique pressure sensitive carrier. This feature allows you to apply small letters and fine designs easily. Fabrics: • 100% polyester • All poly/cotton blends • 100% cotton Application: • All designs must be cut in reverse on the matte side of EW as the glossy side holds the design. • Preheat garment in heat press at 320 F degrees for 4 seconds. • Position EW application on garment with glossy side facing up and matte side facing down on fabric. • Heat transfer at 320F degrees for 10 to 15 seconds. • Peel Cold. Garment Care: • Wash up to 180 F degrees and tumble dry only. • Dry Clean if desired. Available Colors: White, Black, Royal Blue, Navy Blue, Red, Yellow, Green, Orange, Fuchsia, Light Blue, Brown, Gold, Silver, Bordeaux, Violet |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
EW Vinyl Heat Transfer Media Roll Prices
|
| GP Glitterprint Material GP material is easy to print, easy to cut, easy to apply similar to GP material but with the bold look of glitter for a simmering finish. GP material is a white film with glitter pigments embedded in the film. When printed on, the transparent inks allow the glitter to assume the full color or colors of the logo for a bold design Designed for use with today’s thermo-resin printer/cutter and the solvent Mimaki JV-3, Mutoh, eco-solvent printers such as the Roland SP-300 Versa Camm. In addition, CP will perform with the Roland PC, PC-600, Gerber Edge, Fargo printers. This stretchable, yet thin material has a polyester carrier and provides superior durability and washability. GP is a fast and affordable alternative to screenprinting and embroidery, especially for all full color jobs. You can offer this media for full color logos on hats, golf shirts, sweatshirts and more! Fabrics: • 100% polyester • All poly/cotton blends • 100% cotton • Lycra Application: • Print design using your choice of graphic software and printer. • After printing and cutting remove the image from the backing. • For HIGH GLOSSY FINISH Cut Solution Mask to ¼” overlap of design and peel from backing. Press Solution Mask over CP print and sweege out air blubbles. • Peel back Solution Mask with CP print and position on garment • Preheat garment in heat press at 320 F degrees for 4 seconds. • Heat transfer at 320F degrees for 15 seconds at medium pressure. • Peel Solution Mask Cold. • For SATIN FINISH peel back GP glitter material and position on garment. • Preheat garment in heat press at 320 F degrees for 4 seconds. • Heat transfer at 320F degrees for 15 seconds at medium pressure with TEFLON SHEET on top of GP glitter material • Allow to cool. Note: Printer heater should be set at 95 F degrees. Garment Care: • Wash up to 180 F degrees and tumble dry only. • Dry Clean if desired. Available Colors: White film with glitter pigments |
GP Glitterprint Material Roll Prices
|
| CP material CP material is easy to print, easy to cut, easy to apply alternative to expensive and time- consuming screen printing and embroidery projects. Designed for use with today’s thermo-resin printer/cutter and the solvent Mimaki JV-3, Mutoh, eco-solvent printers such as the Roland SP-300 Versa Camm. In addition, CP will perform with the Roland PC, PC-600, Gerber Edge, Fargo printers. This stretchable, yet thin material has a polyester carrier and provides superior durability and wash ability. CP is a fast and affordable alternative to screenprinting and embroidery, especially for all full color jobs. You can offer this media for full color logos on hats, golf shirts, sweatshirts and more! Fabrics: • 100% polyester • All poly/cotton blends • 100% cotton • Lycra Application: • Print design using your choice of graphic software and printer. • After printing and cutting remove the image from the backing. Drying time up to 6 hours when solvent inks used. • Cut Solution Mask to ¼” overlap of design and peel from backing. Press Solution Mask over CP print and sweege out air bubbles. • Peel back Solution Mask with CP print and position on garment • Preheat garment in heat press at 320 F degrees for 4 seconds. • Heat transfer at 320F degrees for 15 seconds at medium pressure. • Peel Solution Mask Cold. Note: Printer heater should be set at 95 F degrees. Garment Care: • Wash up to 180 F degrees and tumble dry only. • Dry Clean if desired. Available Colors: White material to print onto. |
CP Material Roll Prices
|
| RF Reflective Heat Transfer material RF Reflective Heat Transfer material is a new state of the art material. This remarkable product has a higher reflective ability due to our glass bead construction. This product weeds easily and can be applied to most textile surfaces: Including 100% polyester, all poly/cotton blends, 100% cotton, nylon, lycra, leather and spandex. Any vinyl cutter can be used to create your production. Fabrics: • 100% polyester • All poly/cotton blends • 100% cotton • Most nylons • Spandex • Leather • Lycra Application: • All designs must be cut in reverse. • Preheat garment in heat press at 305 F degrees for 4 seconds. • Position RF application on garment with glossy side facing up and matte side facing down on fabric. • Heat transfer at 305F degrees for 5 seconds. • Peel Cold. • RE-Press with Teflon Sheet at same time, temperature and pressure. • Peel Hot Available Colors: White, Black, Royal Blue, Navy Blue, Red, Yellow, Green, Orange, and Silver. |
RF Reflective Heat Transfer Material Roll Prices
|
| SF Suede Heat Transfer Material SF Suede Heat Transfer material is an alternative to embroidery, SF Suede gives logos a raised textured, suede like feel. This product can be applied to these textile surfaces: Including 100% polyester, all poly/cotton blends and 100% cotton. Any vinyl cutter can be used to create your production. Fabrics: • 100% polyester • All poly/cotton blends • 100% cotton Application: • All designs must be cut in reverse. • Preheat garment in heat press at 320 F degrees for 4 seconds. • Position SF Suede application on garment and heat transfer at 320F degrees for 15 to 20 seconds. • Peel Cold. Available Colors: White, Black, Royal Blue, Navy Blue, Red, Yellow, Light Yellow,Green, Orange, and Grey |
SF Suede Heat Transfer Material Roll Prices
|
| VFE Heat Transfer Material VFE Heat Transfer allows you to print on leather and nylon with confidence and quality. VFE is designed for use on difficult-to-print textiles such as nylon and leather. Fabricated with a special adhesive that bonds flawlessly to most nylons, leather and other challenging textile surfaces. Due to different coatings on nylon, we suggest testing material before running production. VFE is an excellent alternative to screenprinting or embroidery on hard to decorate items such as umbrellas, gloves, nylon jackets, leather vests and jackets and much, much more. Fabrics: • 100% polyester • All poly/cotton blends • 100% cotton • Most woven nylons • Leather Application: • Cut names, numbers and logos in reverse after removing pink liner from adhesive surface. • Preheat garment in heat press at 320 F degrees for 4 seconds. • Position VFE application on garment and heat transfer at 320F degrees for 4 seconds. • Peel Cold. • Then cover image with Teflon sheet and re-press at same temperature and pressure for 10 seconds and peel hot. Available Colors: White, Black, Royal Blue, Navy Blue, Red, Yellow, Green, Orange, Fuchsia, Light Blue, Brown, Gold, Silver, Bordeaux and Violet. |
VFE Heat Transfer Material Roll Prices
|
| COASTAL EXPORTS, INC. 6000 Coral Ridge Dr., Suite 63 Coral Springs, Fl. 33076 Phone: 954-474-1999 Fax: 954-364-7648 E-mail: sales@coastalexports.net website: www.coastalexports.net |
Vinyl and Transfer Media
We take PRIDE in providing you with Dye Sublimation and Print products and services
Coastal Exports, Inc.
We are proud to inform you will are a full line distributor of the Siser heat transfer media line for
the popular EasyWeed shirt transfer vinyl, EasyWeed Electric, EasyWeed Stretch,Reflect-All,
Stripflock,Videoflex, Videoflex glitter,Videoflex Moda, Colorprint, Colorprint Crystal glossy and
matte, Evolution and Extra.
the popular EasyWeed shirt transfer vinyl, EasyWeed Electric, EasyWeed Stretch,Reflect-All,
Stripflock,Videoflex, Videoflex glitter,Videoflex Moda, Colorprint, Colorprint Crystal glossy and
matte, Evolution and Extra.
Fashion Vinyl Transfer Media- Matt polyurethane material with special patterns and
3D structure representing fashionable effects for heat transfer applications.
Suitable for cotton, polyester, acrylic and similar fibres.
Thickness : 50-60 microns (USA : 2,2-2,4 mil) and 120 microns (USA : 4,7 mil). for 3D material.
Carrier : self-adhesive and transparent polyester.
Norm : Oekotex label standard 100 class II.
3D structure representing fashionable effects for heat transfer applications.
Suitable for cotton, polyester, acrylic and similar fibres.
Thickness : 50-60 microns (USA : 2,2-2,4 mil) and 120 microns (USA : 4,7 mil). for 3D material.
Carrier : self-adhesive and transparent polyester.
Norm : Oekotex label standard 100 class II.
640 ARMY 645 ARMY 644 ARMY GREY 643 ARMY BLUE 641 ARMY SAND 642 ARMY PINK 611 JEAN BLACK
CAMOUFLAGE
CAMOUFLAGE
670 LITTLE FLOWERS 650 TECHNO 610 JEANS 652 WENGE 665 TARTAN RED 667 BEIGE TARTEN 690 STRIPES
621 PANTHER 620 LEOPARD 630 COBRA 631 PYTHON 632 LIZARD 651 BASKETBALL 662 WHITE
LEATHER
LEATHER
661 RED LEATHER 660 BROWN LEATHER 622 ZEBRA 623 PINK ZEBRA 624 GREEN ZEBRA 625 TIGER 680 CARBON FIBRE
681 WJOTE CARBON 689 BLUE CARBON 686 RED CARBON 683 SILVER CARBON 682 GOLD CARBON
|